IMFutuRe will in the future represent Bladena on the Spanish market as an authorized dealer and installation partner of Bladena’s products. In view of the increasing demand for blade repairs and maintenance in Europe the collaboration between Bladena and IMFutuRe is a deliberate decision to accommodate those demands.
With more than 18 years of experience in management, administration, operation and maintenance of facilities in the wind industry IMFutuRe is a well-established key player on the Spanish market with a strong portfolio of customers. Seeing many different types of blade damages (both minimal and critical failures) IMFutuRe has expert insight about the increasing problems different blades are facing which is of great value to Bladena.
“We see and hear a lot about the increasing blade failures that challenges the lifetime of blades on the market. But to be able to help prevent these problems we need insight from repair and maintenance experts as they see, in a larger perspective, how the problems physically evolves by being present on site. With our expertise in structural behavior and damages and ImFutuRe’s knowledge on problems occurring on site, we will be able to bring our retrofit products out on the Spanish market through our new partner,” says Anders Søe-Jensen, CEO of Bladena.
With more than 20,000 wind turbines installed in over 1,000 farms Spain has become one of the world leaders in the wind industry. With the large amount of wind turbines in operation, Spain is a market with a large potential both for Bladena and IMFutuRe: supporting wind turbine owners and operators in keeping the blades structurally fit and in operation during the lifetime of the turbines.
Bladena has for the last 7 years focused on developing quality retrofit products that prevent and minimize blade failures with the simple aim to increase the lifetime and durability of blades. This work will now be taken to the next level in Spain together with IMFutuRe.
International group of wind turbine owners gather in Copenhagen to attend seminar on Next Generation Inspection Methods
18 wind turbine owner companies attend the Next Generation Inspection Methods Seminar June 4th-6th to discuss how to reduce Operation & Maintenance (O&M) cost. A topic many WTOs seek answers to as larger blades increasingly show signs of structural issues after end of warranty.
Each year wind turbine owners, as part of the WTO Blade Group Network, meet to discuss blade related issues. This year’s seminar focuses on inspection methods; what is done today and what should be done in the future, adding the aspect of Owners Requirements to future blades. To explore today’s methods, inspection experts from around the world present advanced technologies with new improved data and results.
ENGIE’s Wind Technology Manager, Nicolas Quiévy, says: “New steps have to be made today to better assess the blade condition. Improvements and changes in blade inspection methodologies not only aim to minimize downtime and risk of failure because of severe damages that were not anticipated, but will also increase knowledge about (future) blade design, and maintenance strategies to be adopted.”
Today (June 4th) the participants arrived at Bladena in Roskilde to discuss why and how blades fail and how these failures can be avoided by adding new Owners Requirements’ criteria to existing blade certification standards. The Owners Requirements and Inspection methods go hand in hand as both topics through different approaches attempt to improve the performance and lifetime of blades, which is the wind turbine owners’ main concern.
Continuing at FORCE Technology June 5th Aracnocoptero, Toyota Tsusho Corporation, Hensoldt, Siemens, Das Nano NOTUS, IMFUTURE and FORCE Technology will present new technologies and knowledge on blade inspection discussing the different types of blade failures occurring and the need for a systemized and standardized inspection data roadmap.
Project Manager and CTO of Bladena, Find Mølholt Jensen, says: “As Project Manager for both projects, Bladena is devoted to increase the awareness about structural related blade issues. Through the RATZ and EWIC projects Bladena sees a positive growth in the interest from wind turbine owners, insurance companies, inspection and blade experts who are eager to come together to exchange experience on how to reduce maintenance cost and more so the lifetime of blades”.
This year, a third day has been added to the seminar with the focus on failure in composite materials (on wind turbine blades). The wind turbine owners will have the opportunity to witness physical test results of blade failures that are not detected by today’s inspection methods. Day 3 (June 6th) will take place at the Technical University of Denmark (DTU) in Lyngby.
The WTO seminar is partly funded through the EWIC Project (End of Warranty Inspection Concepts) facilitated by Offshoreenergy.dk through the European Regional Development Fund under the heading CRIF - Cost Reduction and Innovative Forum and partly under the RATZ Project funded by the Energy Technology Development and Demonstration Program (EUDP), which is administered by the Danish Energy Agency.
Wind Turbine Owners and insurance companies attending the WTO Next Generation Inspection Methods Seminar: Acciona Energy, Brookfield Renewable, EDF Energy, Eneco, Enel, ENGIE, E.ON, EWII, Gemini Wind Park, HOFOR, Innogy, Natural Power, RES, ScottishPower Renewables, Statoil, Stena Renewable, Vattenfall, WindMW Service GmbH and CODAN.